Compaq HB1004 manual Displaying System Information, 10Setup and Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-10Setup and Configuration

The Factory Default configuration settings never change and are always available to apply to the hub. When you select Factory Setting from the Main Menu the Factory Default configuration is loaded into the Current configuration. See Table B-3 in Appendix B for a list of all factory default settings.

Displaying System Information

Use the Information command to display and modify system information about the hub, or for quick system identification. View a description of the system:

Figure 3-7.System Information Screen

QSystem Description – Identifies the hub

QSystem Uptime - Length of time the management agent has been running

QSystem Name – User-defined name for the hub

QContact - Contact person for the system

QLocation - Specifies the area or location where the system resides