. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing System Configuration
Use the Configuration command from the Main Menu to modify current values for the following parameters:
Figure 3-8. System Configuration Screen
QIP Address - IP address of the HB1004 agent. The agent runs the SNMP protocol over the UDP/IP transport protocol. In this environment, all systems on the Internet, such as network interconnection devices are assigned an IP address.
QMAC Address - Hardware address of the agent. The MAC address can also be found on a sticker on the front panel of the hub above the COM port.
QSubnet Mask - Subnet mask of the agent you’ve selected. This mask identifies the host address bits used for routing to specific subnets.
QDefault Gateway - Default gateway used in passing trap messages from the hub agent to the management station.
QTFTP Server IP – Sets the TFTP server IP address.
Q
Compaq HB1004
