Local Terminal Configuration

Using the Main Menu

HSSI WAN Interface Configuration

Use the following procedure to configure the HSSI WAN Interface:

1.On the Main Menu, Press 3, Modify/View Interface Values. You see the Modify/View Interface Values menu (Figure 2-7).

Modify/View Interface Values Menu - Firmware Rev

Interface Type

HSSI

[1]Port

3.1 HSSI

[2]Port Type

Monitor-only

[3]Data Sense

Normal

[4]Link Type

Frame Relay

[5]Clock Speed

52 Mb

S.Save changes and exit

 

0.Cancel changes and exit

 

Figure 2-7: Modify/View Interface Values Menu (HSSI WAN)

2.Press a number to select a field and then type the corresponding values necessary to configure the probe to operate on your network.

33

Page 53
Image 53
Agilent Technologies J3916A manual Hssi WAN Interface Configuration, Modify/View Interface Values Menu Hssi WAN