Connecting the Probe | Agilent Technologies J3916A instruction

Installation

Connecting the Probe

Figure 3-13: Probe Modem Connection

Install the Management Station Modem

You need the following list of equipment to install the management station’s modem:

Hayes-compatible 300 to 38.4 K baud modem

zRS-232C (straight through) modem cable

Modular phone cable with RJ-11 connectors or equivalent

Use the following procedure to install the management station’s modem:

CAUTION Turn off all equipment prior to making cable connections.

1.Place the modem close enough to the management station to not violate the 50-foot RS-232C distance limitation.

2.Connect the RS-232C cable from the modem’s RS-232C port to the management station’s serial port. Take care in selecting the appropriate serial port on the management station (COM1 or COM2, for example).

3.Connect the RJ-11 modular phone cable from the modem To Line port to the telephone jack.

4.Connect power to the modem and turn on the modem power switch (not required for a PC internal modem).

61

Image 81

Agilent Technologies J3916A manual Connecting the Probe

Contents

Agilent J3916A Hssi WanProbe Consumer Warranty Statement Iii Restrictions dutilisation Operating Restrictions Environnement Page Safety Information Viii Conventions Used in this Book Trademarks Additional Help Printing History Additional Help Contents Bootp Server Configuration Installation Cables and Connectors Probe OperationDownload New Firmware Glossary Index Agilent Technologies, Inc. Offices Specifications Figures Probe Main Menu Xmodem Tables Page Introduction Introduction Probe Installation and Configuration Overview Local Terminal Configuration and InstallationInstallation and Bootp Server Configuration System Overview Probe Overview WAN Network Supported MIBs Management Stations Access Security Private MIB Access Security Privileges DefaultPermissions Front Panel LEDs Status LEDs 10Base-T/100Base-TX Telemetry Interface Status LEDs Rear Panel Telemetry LEDs Rear Panel LEDs Token-Ring Telemetry Interface Status LED Hssi WAN Interface Status LEDs Config Button Included Parts Optional Accessories Local Terminal Configuration Local Terminal Configuration Probe Configuration Using a Local Terminal Probe Configuration Using a Local Terminal Using the Main Menu Probe Rear Panel Probe Main Menu Modify/View Configuration Values Menu Modify/View Configuration Values Date Modify/View Security Values Menu Modify/View Security Values Modify/View Interface Values Fast Ethernet Telemetry Interface Configuration Modify/View Interface Values Menu Fast Ethernet Port Interface will transmit all extended Rmon packets Token-Ring Telemetry Interface Configuration Modify/View Interface Values Menu Token Ring Retrieval of WAN ATM network statistics. Refer to Fast Using the Main Menu Modify/View Interface Values Menu Hssi WAN Hssi WAN Interface Configuration Sense type as Normal, Inverted, or Nrzi Non-Return to Using the Main Menu Display Interface Summary Modify/View Serial Port Settings Modify/View Serial Port Settings Menu For direct connection the default or 2 for modem Be displayed in the Modify/View Serial Port Settings Exiting the Main Menu and Restarting the Probe Installation Installation Selecting a Location Installing the Probe Rack or Cabinet Installation Table Installation Install the Probe in a Rack or Cabinet Shows a wall installation Wall Installation Install the Probe on a Wall Connecting to the Network Out-of-Band Connecting the Probe Probe Rear Panel Token-Ring Option shown Connecting to 10MB/s Ethernet Telemetry Networks Connecting the Probe to a 10MB/s Ethernet Network Connecting to 10Base-T/100Base-TX Telemetry Networks Connecting the Probe Connecting the Probe to a 10Base-T/100Base-T Network Connecting to Token-Ring Telemetry Networks Connecting the Probe Using RJ-45 Connectors Connecting the Probe using a Media Filter About the Information in the Following Sections Connecting the Probe Using Data & DB-9 Connectors WAN 11 Hssi Monitor In-Line Connection In-Line Hssi Connection Direct Connection Connecting to the Serial Port Out-of-Band 12 Probe Direct Connection Modem Connection Connecting the Probe Configure the Management Station and the Probe Install the Probe’s Modem Connecting the Probe Init String Data Switch Connection 14 Probe Data Switch Connection Starting the Probe State Verifying the Installation Ethernet Telemetry Interface Out-of-Band Troubleshooting Hssi Troubleshooting Bootp Server Configuration Bootp Server Configuration Probe Configuration Using a Bootp Server Bootp Server Type Minimum Requirements for a Bootp ServerSun Bootp Server Setup on an HP or Sun System Networking and Communications Network Services Networking/Communications -ServiceEnable/Disable Usr/netm/sun4s/bootpd -s Starting the Bootp Server on an HP or Sun System Ps -ef grep inetd Bootp Server Setup on a PC Using Microsoft LAN Manager Final screen looks like the following LSL.COM Using Novell NetWare Starting the PC Bootp Server Bootp Server Setup on a PC Configuring the Bootptab File Bootp Server Bootptab File LocationBootp Server Bootptab Files Tag Description Bootptab File Tags Server Verification Process Bootp Process Verification Example Bootptab File Probe Operation Probe Operation Warm Start Restarting the Probe Probe Data and Parameters Reset by Warm or Cold Start Cycling Power Selecting the Warm Start Menu Item Cold Start Pressing the Config Button Twice Selecting the Cold Start Menu Item Download New Firmware Download New Firmware Download New Firmware Install New Download Firmware on an HP-UX Workstation Download Firmware to the Probe Probe Main Menu HP-UX Workstation Probe Tftp Download Menu HP-UX Workstation Setup Tftp Server for Downloading Downloading Firmware using a Networked PC and a Terminal 105 Probe Main Menu Networked PC Probe Tftp Download Menu Networked PC Xmodem Download of Firmware Probe Main Menu Xmodem Downloading to Flash Receiving File Etc/inetd -k 112 Cables and Connectors Cables and Connectors Table A-1 Hssi Interface Cable Pinout Hssi Connectors and Cables Signal Name From Pins Direction To Pins Hssi Null Modem CableTable A-2 Hssi Null Modem Cable Pinout 117 Token-Ring Cables Cable Type ImpedanceTable A-3 Token-Ring Cable Type, Vp, and Impedance Cable Function Cable Type Connectors Agilent Product Number Serial Port Interface CablesTable A-4 Serial Port Interface Cable Cable Connector Pin-Outs Probe’s RS-232 Port Pin-OutTable A-5 Probe RS-232 Port Pin-Out Probe’s RS-232 Modem Cable Connectors Modem Probe End End 25-pinMale Pin Terminal/PC Cable Connectors Table A-9 UTP Type 3 Network Connector Pin-Outs UTP Network Connector Pin-OutMsAU End Probe End RJ-45 Connector STP Network Connector Pin-OutTable A-10 STP Type 1 Network Connector Pin-Outs DB-9 Specifications Network Connection Network CompatibilitySoftware Standards Modem Weight DimensionsPower Requirements Environment Operating Non-Operating Probe Memory Allocation Figure B-1 Probe Memory Allocation Parameter 32MB 64MB 128MB 130 Glossary Address Resolution Protocol ARP Adccp Advanced Data Communication Control ProcedureAdvanced Data Communication Control Procedure Adccp 10Base-T Agent Battery-backed RAMAnsi American National Standards Institute Ascii American Standard Code for Information Interchange Block Error Rate Bit Error RateBlock Errors BCC Block Check Characters Bridge CBR Constant Bit Rate ServiceBroadcast address Broadcast packet CSU Channel Service Unit CSMA/CD Carrier Sense Multiple Access/Collision DetectionCongestion Console DSU/CSU Data Service Unit/Channel Service Unit Default Gateway AddressData Link Layer Discard Eligibility Bit D/E Encapsulation Errored SecondsEquipment Equipment Build Out FCS Frame Check Sequence Fs Signal FramingFlash Eprom Forward Explicit Notification Bit Fecn Hdlc High Level Data Link Control Half-duplexHeader Ieee 802.3 standard LAN Local Area Network LAP-F Link Access Procedure, Frame-RelayLAN cable Layer LMI Local Management Interface Line Build OutLongitudinal Redundancy Check LRC MAC address Mbps MsAU Media station Access UnitMedia Filter Metropolitan Area Network MAN Nibble Network LayerNrzi Non-Return to Zero Invert Object Point-to-point configuration Packet SwitchingPoll/Final bit Packet PPP Point to Point Protocol SAM System Administration ManagerPrivate MIB Probe Sdlc Synchronous Data Link Control Signal Framing FsServer Simm Single Inline Memory Module Subnet Mask SVC Switched Virtual CircuitSynchronous Data Link Control Sdlc Telemetry Port Token ThickLANToken-Ring Token-Ring Cable WAN Wide Area Network WanProbeWide Area Network WAN Numerics Symbols 152 153 154 155 156 157 158 Agilent Technologies, Inc. Offices