Local Terminal Configuration
Using the Main Menu
30
2. Press a number to select a field and then type the corresponding values
necessary to configure the probe to operate on your network.
Port Press
1 and then press the number of the Token-Ring port to
display the Token-Ring port configuration parameters along
with the current settings. The port number for the T oken -Ring
interface (if installed) depends on wh ere it is installed. Refer
to “Display Interface Summary” on pa g e 36 for information
on port types and port numbers for the installed interfaces.
You can then view or configure the Token-Ring port
configuration parameters.
Modify/View Interface Values Menu - Firmware Rev
MAC Address 00 00 C6 XX XX XX
Interface Type Token Ring
[1]Port 3
[2]Port Type Telemetry
[3]IP address 0.0.0.0
[4]Default gateway IP address 0.0.0.0
[5]Subnet mask 0.0.0.0
[6]Token Ring Speed (Mbps) 16
[7]Ring Number -1
S.Save changes and exit
0.Cancel changes and exit
Figure 2-6: Modify/View Interface Values Menu (Token Ring)