Bootp Server Configuration
Bootp Server Setup on a PC
Using Novell NetWare
If you have selected Microsoft LAN Manager 1.0 or later, go back to “Using Microsoft LAN Manager” on page 80.
If you have selected Novell NetWare v3.1 or later from the setup menu, use the following procedure to setup your Bootp installation.
1. Press return to continue from the following screen.
Bootp Installation for Novell networks: |
| |
======================================= |
| |
In order | to use this product using the | NetWare protocols, |
you need | to be running client versions | of NetWare that |
include: |
|
|
- LSL.COM | v1.20 or later |
|
Your NET.CFG file must specify a FRAME | type of | |
ETHERNET_II. For example, your NET.CFG | should include |
something like:
LINK DRIVER HPWDSA8 FRAME ETHERNET_II
Bootp also requires that you do not have Novell TCP/IP software (LAN Workplace for DOS) installed.
(Press return to continue or ‘E’ to Exit.)
2.Specify the location of the NET.CFG file. The default is for the NET.CFG file to be located at C:\NOVELL\NET.CFG.
Setup could not find the NET.CFG file. Please specify a full path and filename (e.g. C:\NOVELL\NET.CFG):
82