Specifications

 

 

Probe Memory Allocation

 

 

The memory allocated to each parameter depends on how much memory is

 

 

installed in the probe. The memory parameter values relate to the various items in

 

 

the RMON or the Agilent private MIBs. These parameters were valid at the time

 

 

of publication.

 

 

Table B-1 shows the memory allocated to each parameter for the available probe

 

 

memory configurations. The memory allocation shown for each memory amount

 

 

column assumes that all of the available memory within the probe is allocated to

 

 

the identified parameter.

 

 

 

NOTE

The parameter values shown in Table B-1 are approximate and subject to change

 

 

without notice.

 

 

Network Statistics and Trace buffers (packet capture buffers) are allocated

 

 

dynamically from the same memory allocation. The values shown for Network

 

 

Statistics assume that no Trace buffers are configured. If Trace buffers are

 

 

configured, the number of Network Statistics are reduced.

 

 

 

128

Page 148
Image 148
Agilent Technologies J3916A manual Probe Memory Allocation