Safety Information
Safety Information
Before you use this instrument, be sure to pay special attention to the “Safety” and “Warning” topics in this Manual. Failure to comply with the precautions or with specific warnings in this book violates safety standards of design, manufacture, and intended use of this instrument. Agilent assumes no liability for the customer’s failure to comply with these requirements.
Electric Shock Hazard. Do not remove the system covers. To avoid electric shock, use only the supplied power cords and connect only to properly grounded
Explosion Hazard. Do not operate in the presence of flammable gases.
Fire Hazard. For continued protection against fire hazard replace only with fuse of same type and rating.
Indoor Use. This instrument is designed for indoor use.
Cleaning. To clean the instrument, use a damp cloth moistened with a mild solution of soap and water. Do not use harsh chemicals. Do not let water get into the instrument.
Product Damage. Do not use this product when:
the product shows visible damage, fails to perform,
Qhas been stored in unfavorable conditions, or has been subject to severe transport stresses.
Make the product inoperative and secure it against any unintended operation. Contact your nearest Agilent Sales office for assistance.
Defects and Abnormal Stresses. Whenever this instrument has been damaged or wet, make the product inoperative and secure it against any unintended operation.
vii
