Local Terminal Configuration
Using the Main Menu
Modify/View Interface Values Menu - Firmware Rev
Interface Type |
| Serial |
[1]Port |
| 1.2 Serial |
[2]Port Type |
| NA |
[3]Serial port | IP address | 0.0.0.0 |
[4]Serial port | subnet mask | 255.255.252.192 |
[5]Serial port | speed | 9600 |
[6]Serial port | mode | Direct |
[7]Serial port | hardware flow control | On |
[8]Modem Init String | ^s^M^d1^sATE0Q0V1X4 | |
|
| S0=1... |
[9]Modem Hangup String | ^d2^s+++^d2^sATH0^M^d2 | |
[10]Modem Connect Responses | /CONNECT/300/CONNECT/1200/ | |
|
| ... |
[11]Modem | /NO CARRIER/BUSY/NO | |
|
| DIALT... |
S.Save changes | and exit |
|
0.Cancel changes and exit |
| |
Figure 2-9: Modify/View Serial Port Settings Menu
2.Select Interface Type and then type Serial.
3.Press 1, Port and then type the Serial Port Number. You see the current serial port settings (Figure
37
