Compaq HB1004 manual Restarting the Agent, Reverting Configuration to Factory Settings, Help

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-15

QRetry - Number of attempts to make contact.

QFilename - The *.bin file to download.

QTransferred Block - Current number of data block being transferred.

QTotal Blocks - Total number of blocks to transfer.

Restarting the Agent

Use the Restart command from the Main Menu to reset the agent. LEDs on the agent will light up sequentially as it executes the initialization test. This will also reset the statistics counter to 0 (zero).

Reverting Configuration to Factory Settings

Use the Factory Settings command from the Main Menu to change all configuration settings back to the factory defaults. See Table B-3 in Appendix B for a list of all factory default settings.

Saving a New Configuration

The Save Configuration option saves any changes you have made to the hub’s configuration. The hub will use the new configuration each time it boots up until you change it again.

Resetting the Configuration

The Reset Configuration option returns the hub to the last saved configuration. See Page 3-7 for an explanation of the different system configuration settings.

Help

Use the Help option to get a brief description of each of the Main Menu options.

Compaq HB1004 10Base-T Hub User Guide