. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring Port Parameters
Use the Port Control command to configure the ports. This menu provides a brief description of the hub, and also allows you to enable/disable any port on the hub.
Figure 3-10. Port Control Screen
QPort Identifier - Numeric identifier 1 to 4.
QName -
QType - Connection type is
QStatus - Any port may be ENABLED or DISABLED.
QPart - Indicates if the port is partitioned.
QLink State - Indicates if the port has a valid connection to an external device.
Network Performance
The Network Status screen displays statistics for each of the hub ports. The last line shows total statistics for the hub and is the sum of all of the port statistics.
Figure 3-11. Network Status Screen
Compaq HB1004
