. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-5

 

I

 

O

Figure 2-4

Connecting the Power Cord

3.Check the LED marked PWR on the front panel to see if it is on. The unit will automatically select the setting that matches the connected input voltage. Therefore, no additional adjustments are necessary when connecting it to any input voltage within the specified range. See Appendix A for power requirements.

4.The hub performs a self-diagnostic test upon power-on.

Compaq HB1004 10Base-T Hub User Guide

Page 15
Image 15
Compaq HB1004 manual Connecting the Power Cord