Compaq HB1004 manual Open box

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-5

NOTE: The Compaq HB1004 System Configuration Program allows selection of COM Ports 1, 2, 3 or 4 and assumes the normal default IRQ for the appropriate port (i.e. COM1 is IRQ4, COM2 is IRQ3, COM3 is IRQ4 and COM4 is IRQ3). If your communication port is configured differently, it is necessary to specify the correct IRQ for that port. If this is the case, type:

A:\HB1004CP /i[irq#] or B:\HB1004CP /i[irq#]

in the Open box.

Figure 3-3Communication Port Dialog Box

2.Using arrow keys, select the workstation’s communication port connected to the hub and press <Enter>. The DCE/DTE dialog box appears as shown in Figure 3-4.

Compaq HB1004 10Base-T Hub User Guide