CHAPTER 6 - RAID Controller
52 SPI-8450-LLVA
6.3.2 Windows 98SE
Installing Drivers During Windows 98SE Installation
1. Enabled the RAID controller and configuring the hard drive(s),partition and format your
drive(s),if necessary.
2. Install Windows 98 normally.
3. After installation, go the “Start” menu and choose “Settings.”
4. From the “Settings” menu, choose “Control Panel.”
5. In the “Control Panel” window, double-click on the “System” icon.
6. In the “System” window, choose the “Device Manager” tab.
7. In the hierarchical display under “Other Devices” is a listing for “PCI RAID Controller.”
Choose it and then press the “Properties” button.
8. Choose the “Driver” tab in the “Properties” window, choose “Update Driver,” and then
press “Next.”
9. Choose “Search for a better driver than the one your device is using now (recommended),”
then press “Next.”
10. Choose “Specify Location,” and then type “D:RAID\WIN9x-ME” in the text box.
* This case the CD-ROM drive is D: .
11. Insert the CD-ROM into the D: drive.
12. Press the “Next” button. A message informing you that Windows 98 has found “Win9x-
ME Promise FastTrak100-Lite (tm) Controller” should appear.
13. Press “Next,” then “Finish,” then “Yes” when asked if you want to restart your computer.
Be sure to remove the CD-ROM from drive D:.