
CRADLEPOINT IBR600 USER MANUAL Firmware ver. 3.3.0
6.7.3Local Network Interfaces
Each LAN
Select from the following tabs:
∙Wireless (WiFi) Network Settings
∙Ethernet Port Configuration
∙VLAN Interfaces
Wireless (WiFi) Network Settings
The IBR600 can broadcast two SSIDs (service set identifiers — the names for WiFi networks). One primary WiFi network is enabled by default, while you may have enabled a second guest network when using the First Time Setup Wizard. You have the ability to change the settings for either of these networks.
Wireless Radio: Enable/Disable. (Default:
Enabled). Leave enabled unless you don‘t
want any WiFi networks broadcast from your router.
Select a WiFi network and click Edit to change the settings.
© 2011 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 65 |