CRADLEPOINT IBR600 USER MANUAL Firmware ver. 3.3.0
Ethernet Port Configuration
Ethernet Port Configuration provides controls for your router‘s Ethernet ports. There are two ports: one set as LAN and one set as WAN. While default settings will be sufficient in most circumstances, you have the ability to control: Mode (WAN or LAN) and Link Speed. Additional controls for WAN ports are available in Internet → Ethernet Settings.
Mode: WAN or LAN.
∙Internet (WAN) is used to connect to another network such as a hotel or office wired network. The WAN connection is used as a possible source of internet for the IBR600.
∙Local Network (LAN) is for connecting a computer or similar device directly to the router with an Ethernet cable.
Link Speed: Default setting is Auto. The Auto setting is preferred in most cases.
∙Auto
∙10Mbps - Half Duplex
∙10Mbps - Full Duplex
∙100Mbps - Half Duplex
∙100Mbps - Full Duplex
∙1000Mbps - Full Duplex
© 2011 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 69 |
