CRADLEPOINT IBR600 USER MANUAL Firmware ver. 3.3.0
6.8 WiPipe QoS (Advanced Mode only)
When WiPipe QoS (Quality of Service/Traffic Shaping) is enabled, the router will control the flow of internet traffic according to the user- defined rules. In other words, Traffic Shaping improves performance by allowing the user to prioritize applications.
Enable WiPipe QoS: Click on this box to open options for controlling internet traffic. You can control Uplink Speed values or define your own Traffic Shaping rules. When WiPipe QoS is enabled, the router restricts the flow of outbound traffic so as not to exceed the WAN uplink bandwidth.
Default Uplink Speed: By default, the Uplink Speed values are set as fast as possible. Click to deselect default values if you want to restrict the maximum uplink speed for the internet source(s) you are using (4G Modem, Ethernet, 3G Modem, and/or WiFi).
You might do this to reduce overall bandwidth use for cost reasons or to prioritize available bandwidth for download. It is recommended that
you experiment with different values for your particular internet connection to yield the best results.
NOTE: Uplink speed is the speed at which data can be transferred to your ISP. You can test your uplink speed with a service such as speedtest.net.
© 2011 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 75 |
