CRADLEPOINT MBR1400 USER MANUAL Firmware ver. 3.4.1

6.7.1Local IP Networks

Local IP Networks displays the following information for each network:

Network Name

IP address/Netmask

DHCP Server (Enabled/Disabled)

Routing Mode (NAT, Standard, Hotspot, Disabled)

Access Control (Admin Access, UPnP Gateway, LAN Isolation)

Attached Interfaces (Ethernet ports, WiFi, VLAN)

Click Add to configure a new network, or select an existing network and click Edit to view configuration options.

HotSpot (Captive Portal)

When you set a network as a ―Hotspot‖ under Routing Mode, you will also need to make sure to:

1)Configure hotspot settings under

System Settings → Hotspot

Services. Click on Configure to link to that page.

2)If you want a hotspot that includes WiFi, set one of your WiFi interfaces to ―Open‖ for its Security Mode and attach this interface to your hotspot network. Otherwise guests will need to know the password to connect to the WiFi network even before viewing a Terms of Service page (or other hotspot options).

Finally, make sure your WiFi interface is ―Enabled‖.

© 2012 CRADLEPOINT, INC.

PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES

PAGE 73

Page 75
Image 75
Cradlepoint MBR1400LE manual Local IP Networks, ∙ Network Name ∙ IP address/Netmask, HotSpot Captive Portal