CRADLEPOINT MBR1400 USER MANUAL Firmware ver. 3.4.1
7.1.5Modem Settings
On Demand: Typically modem connections are not always on. When this mode is selected a connection to the Internet is made as needed. When this mode is not selected a connection to the Internet is always maintained.
Maximum Idle Time: The interval for which the modem can be idle before it is disconnected.
Aggressive Reset: When Aggressive Reset is enabled the system will attempt to maintain a good modem connection. If the Internet has been unreachable for a period of time a reset of the modem will occur in attempt to
LTE Connection Mode: Specify how the LTE Multi Mode modem should connect to the network.
∙Auto: Let the modem decide which network to use.
∙Auto EVDO/1xRTT: Connect to CDMA, letting the modem decide which 3G network to use. Do not attempt to connect to LTE.
∙Force LTE: Connect to LTE only (do not attempt to connect to CDMA/GSM).
∙Force EVDO: Connect to CDMA EVDO network only.
∙Force 1xRTT: Connect to CDMA 1xRTT network only.
AT Dial Script: Enter the AT commands to be used in establishing a network connection. Each command must be entered on a separate line. All command responses must include ―OK‖ except the final command response, which must include ―CONNECT‖.
Example:
AT
© 2012 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 102 |
