CRADLEPOINT MBR1400 USER MANUAL Firmware ver. 3.4.1

Ethernet Port Configuration

Ethernet Port Configuration provides controls for your router‘s Ethernet ports. There are five total ports: one blue port and four numbered orange ports. While default settings will be sufficient in most circumstances, you have the ability to control: Mode (WAN or LAN) and Link Speed. Additional controls for WAN ports are available in Internet → Ethernet Settings.

Mode: WAN or LAN. Default setting is WAN (Wide Area Network) for the blue port and LAN (Local Area Network) for the four orange ports.

Internet (WAN) is used to connect to another network such as a hotel or office wired network. The WAN

connection is used as a possible source of Internet for the MBR1400.

Local Network (LAN) is for connecting a computer or similar device directly to the router with an Ethernet cable.

Link Speed: Default setting is Auto. The Auto setting is preferred in most cases.

Auto

10Mbps - Half Duplex

10Mbps - Full Duplex

100Mbps - Half Duplex

100Mbps - Full Duplex

1000Mbps - Full Duplex

© 2012 CRADLEPOINT, INC.

PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES

PAGE 83

Page 85
Image 85
Cradlepoint MBR1400LE manual Ethernet Port Configuration