CRADLEPOINT MBR1400 USER MANUAL Firmware ver. 3.4.1
LAN port #: Use the LAN port # field to configure the LAN port number you wish to access SNMP services on. (Default: 161)
Enable SNMP on WAN: Enabling SNMP on WAN will make SNMP services available to the WAN interfaces of the router.
WAN port #: Use the WAN port # field to configure which publicly accessible port you wish to make SNMP services
available on. (Default: 161)
SNMPv1: SNMP version 1 is the most basic version of SNMP. SNMPv1 will configure the router to transmit with settings compatible with SNMP version 1 protocols.
SNMPv2c: SNMP version 2c has the same features as v1 with some additional commands. SNMPv2c will configure the router to use settings and data formatting compatible with SNMP version 2c.
SNMPv3: SNMP version 3 includes all prior features with security available. SNMPv3 is the most secure setting for SNMP. If you wish to configure traps then you must use SNMP version 3.
Get community string: The ―Get community string‖ is used to read SNMP information from the router. This string is like a password that is transmitted in regular text with no protection.
Set community string: The ―Set community string‖ is used when writing SNMP settings to the router. This string is like a password. It is a good idea to make it different than the ―Get community string.‖
8.4.2SNMPv3
If you select SNMPv3, you have several additional configuration options for added security.
Authentication type: Select the authentication and encryption type that will be used when connecting to the router from the following dropdown list. These settings must match the configuration used on any SNMP clients.
∙MD5 with no encryption
∙SHA with no encryption
© 2012 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 150 |
