Craftsman 113.248510 Location and function of the electronic indicator system, Open Battery Open

location and function of the electronic indicator system

MODEL 113.248440 & 113.248510 ON LY

BATTERY COVER RELEASE SLOTS

BATTERY COVER

& OPEN BATTERY OPEN •

ELECTRONIC

MEASUREMENT

KEY

BEVEL ANGLE KEY

SION KEY

SPEED KEY (FT. PER MIN.)

_ IEFERENCE SET KEY

DIGITAL READOUT DISPLAY

DIGITAL READOUT DISPLAY

The Liquid Crystal Display, or LCD, on this saw gives the user the ability to accurately position the blade and monitor the set-up. The three functions displayed are:

BATTERY COVER

The Battery Cover covers the battery compartment, To.release the cover, insert a small coin into one of the release slots and twist. Remove the cover.

1. Installing the Battery

Bevel Angle - Shows the present angle of the blade

to the table. The _ keyis used toset thezero degree point.

Blade Tension - Displays the blade size for which the tension has been adjusted.

Blade Speed - Displays the speed of the blade in surface feet per minute (FPM).

NOTE: The function being displayed is indicated by an abbreviated name of the function in the left hand area of the display; either BEV, TEN, or FPM.

The battery is supplied with the loose parts. It is a 6-volt, type J alkaline battery. Install the battery with the contact end down and the "+" terminal towards the left. Push the battery down and back until the top edge of the battery is caught under

the ribs in the compartment. Do not force the battery. It if doesn't push in easily, remove the battery and check that it is positioned correctly.

2.Reinstall battery cover by inserting the tabs on the lower edge of the cover into the mounting holes in the control and pushing the cover into position.

24