Craftsman 113.248510 owner manual

MODEL 113.248510

2.After layout of cabinet parts, take the lower shelf and turn upside down on floor. Small front flange should be pointing upward.

3.Locate the two (2) corner brackets, four (4) 1/4- 20 x 1/2 truss head bolts, Iockwashers, and nuts.

Attach the corner brackets to the front flange in holes as illustrated. Attach both corner brackets.

4.Locate the two (2) side panels, one (1) shelf stiffener, and six (6) 1/4-20 x 1/2truss head bolts, Iockwashers and hex nuts. Place the right side panel on its back side as illustrated. Stand up the lower shelf on the rear flange and line up the holes on the corner bracket and shelf stiffener with the holes in the side panel. Mount the bolts in the three holes and tighten hex nuts with a 7/16-inch wrench or socket. Repeat procedure for left side panel.

5.Locate the two(2) skirts, eight(8) truss head bolts, Iockwashers and hex nuts. Assemble one(l) skirt to the front of the cabinet using four(4) bolts, lock- washers and nuts. Hand tighten only. Stand the cab- inet upright and assemble the rear skirt to the cabinet using two(2) truss head bolts Iockwashers and nuts using the top two holes only. From inside the cabinet insert two bolts out through the two remaining holes in the rearskirt. Installlockwashers and nuts hand tightened only.

o	o	o	o
o	o	o	o

LOWER

SHELF

CORNER/_

BRACKETS7_

\ ,/:o:

CORNER BRACKETS

SHELF

	RIGHT SIDE
SHELF STIFFENER	PANEL
	REAR FLANGE

REAR SKIRT

/...iRIGHT SIDE PANEL

\\

FRONT

SKIRT

SHELF

LEFT SI DE

PANEL

14