•The edge of the square and the saw blade should be parallel as shownin figure 17.

•If the front or back edge of the saw blade angles away from the square as shown in figures 18 and 19, adjustments are needed.

•Using the 10 mm hex key provided, loosenthe socket head screwsthat secure the mounting

bracket to the miter table. See Figure20.

f0 mmSOCKET

10mln ._

HEXKEY"_"

M_NTING/

B_CK_

MITER

TABLE Fig. 20

•Rotate the mountingbracket left or right untilthe saw blade is parallelwith the square.

•Retighten the screws securelyand recheckthe blade-to-fansa alignment.

SQUARING THE BLADE TO THE

MITER TABLE

See Figures 21.24.

•Unplug your saw.

,_k WARNING: Failure to unplugyour saw could result in accidental staffingcausing possible

serious personalInjury.

Pull the saw arm all the way down and engage the lock pin to hold the saw arm in transport

position.

Loosen the miter lock handle approximatelyone- half turn.

Depress the miter lock plate and rotate the miter table until the pointeron the controlarm Is posi- tioned at 0 °.

Release the miter lock plate end securelytighten the miter lock handle.

Loosen bevel lock knob and set saw arm at 0°

bevel (blade set 90 ° to miter table). Tighten bevel lock knob.

Place a combinationsquare against the miter table and the flat part of saw blade.

Note= Make sure that the square contacts the fiat part of the saw blade, not the blade teeth.

•Rotate the blade by hand and check the blade-to- table alignmentat several points.

•The edge of the square and the saw blade should be pe.mllal as shown in figure 21.

FENCE

MITER

TABLE BLADE

MITER

LOCKPLATEMITER

LOCKHANDLE

CORRECTVIEWOFBLADE

SQUAREWITHMITERTABLE Fig. 21

•If the top or bottomof the saw blade angles away from the square as shownin figures 22 and 23, adjustmentsare needed.

FENCE

MITER

TABLE BLADE

MITERMITER

LOCKPLATELOCKHANDLE

VIEWOFBLADENOTSQUAREWITHMITER TABLE,ADJUSTMENTSAREREQUIRED Fig, 22

17

Page 16 Page 18
Page 17
Image 17
Craftsman 315.21212 Squaring the Blade to Miter Table, See Figures, Miter Lockplatemiter Lockhandle Correctviewofblade
Page 16 Page 18

315.21212 specifications

The Craftsman 315.21212 is a remarkable tool designed to provide efficiency and reliability for a variety of home improvement tasks. This powerful electric tool is primarily known for its precision and versatility, making it a favorite among DIY enthusiasts and professional users alike.

One of the standout features of the Craftsman 315.21212 is its robust motor. With an output of 5.5 amps, this tool delivers sufficient power to handle an array of drilling and cutting applications. Whether you are working on wood, metal, or plastic, its impressive torque offers the strength needed to complete the task with ease, allowing users to efficiently tackle their projects without any downtime.

Another significant characteristic of the Craftsman 315.21212 is its ergonomically designed handle. Built for comfort and grip, the handle minimizes fatigue during prolonged use. This thoughtful design ensures that users can maintain better control and precision, leading to high-quality results, even during extended working hours.

The tool also features a variable speed control mechanism that allows users to adjust the speed according to the specific needs of their project. This flexibility is essential for achieving optimal performance across different materials. Users can quickly switch from higher speeds for quick drilling to lower speeds for more delicate tasks, demonstrating the versatility of the Craftsman 315.21212.

In terms of technology, the Craftsman 315.21212 incorporates a keyless chuck system, making it incredibly convenient to change the drill bits. This feature saves time and enhances productivity, as it eliminates the hassle of using additional tools to swap bits. Plus, the built-in LED light is a practical addition that illuminates the workspace, ensuring precision in dimly lit areas.

The Craftsman 315.21212 also boasts a compact design, making it easy to maneuver in tight spaces. It is lightweight yet durable, ensuring that it can withstand the rigors of frequent use. Overall, this tool combines advanced features with user-friendly aspects, making it a top choice for both casual users and professionals looking for reliable performance in their toolkit. Whether handling home repairs or intricate woodworking projects, the Craftsman 315.21212 is equipped to deliver outstanding results.
Top Page Image Contents