Craftsman 315.2121O0 owner manual Carrying Handle, Sea Figure

CARRYING HANDLE

Sea Figure 4.

For conveniencewhen carryingor transportingyour miter saw from one place to another, a carrying handle has been provided on top of the saw arm as shown in figure 4. To transport, turn off and unplug your saw, then lower the saw arm and lock it in the downposition.Lock saw arm by depressingthe lock pin.

CARRYING

HANDLE

LOCK

PIN

SAW

ARM

MITERLOCK

HANDLE

SAWARM

LOCKEDIN DOWNPOSITION

Fig. 4

MITER LOCK HANDLE

Sea Figure 4.

The!miter lock handle securely locksyour saw at desired miter angles.

LOCK-OFF LEVER

See Figure 5.

The switch tdggar is equipped with a lock-offlever to reduce the possibilityof accidental starting.The lock- off lever must be pressed down with the palm of your hand to tum saw on. Once the saw is on, the lock-off lever can be released, The spdng loaded lever will

spdng back intothe lock-offpositionwhen the switch tdgger is released.

SPINDLE LOCK BUTTON

See Figure 5.

Aspindle lock button has been providedfor locking the spindle which stops the rotationof the blade in your saw. Depress and hold the lock buttonwhile installing,changing, or removingblade.

LOCK-OFF

SPINDLE

LOCKBuI"rON

SWITCH,

TRIGGER

Rg. L

TRIGGER LOCK

See Figure 6.

To prevent unauthodzed usa of your compound miter saw, we suggest that you disconnectit from the power supply and lock the switchin the off position.To lock the switch, install a padlock throughthe hole in the switch tdggar. A lock with a shackle up to 13/64 in. diameter may be used. When the lock is installedand locked, the switch is inoperable. Store the padlock key in another location.

SWITCH

TRIGGER

Fig. 6

11