BladeDiameter | 10in. | CuttingCapacitywithMiterat0°/Bevel0°: |
BladeArbor | 5/8in. | |
NoLoadSpeed | 5000RPM | MaximumCuttingCapacitywithMiterat45°/Bevel0°: |
Rating | ||
Input | 15Amperes | MaximumCuttingCapacitywithMiterat0°/Bevel45°: |
NetWeight | 32Ibs. | |
|
| MaximumCuttingCapacitywithMiterat45°/Bevel45°: |
|
|
YourCompoundMiterSawhasbeenshipped
completelyassembled except for the blade, miter lock handle, and dust guide.
Do not discard the packing materials untilyou have carefully inspectedthe saw, identifiedall loose parts, and setisfa_odly operated your new
saw.
_lb WARNING: If any parts are missing,do not operate this tool until the missingparts are
replaced. Failure to do so could result in possible serious porsonal injury.
•Remove all loose parts from the carton. Separate and checkwith the list of loose parts. See Rgure 2.
•Remove the packing materialsfrom around your saw.
•Carefully lift saw from the carton and place it on a level work surface. Althoughsmall, this sew is heavy. To avoid back injury,get help when needed.
•Your saw has been shippedwith the saw arm locked in the down position. To release sew arm, push down on top of saw arm and pullout the lock pin. See Figure 4.
•Lift the saw arm by the handle. Hand pressure shouldremain on the sew arm to prevent sudden rise upon release of the lock pin.
•Examine all parts to make sure no breakage or damage has occurreddudng shipping.
If any parts are damaged or missing,do not attempt to plug in the power cord and turn the switchon untilthe damaged or missingparts are obtained and are installedcorrectly.
