![](/images/new-backgrounds/1290168/29016835x1.webp)
UCommand-616 Universal Remote Control User’s Manual
Inserting batteries
To insert batteries, refer to the following illustration and instructions:
1.Remove battery cover.
2.Insert
Connector for Battery charger
Ensure
that you insert
the batteries according to the marking
inside the battery case.
Figure 2-1: Inserting the batteries
1.Locate the
2.Put your thumb in the battery cover slot and pull to remove the cover.
3.Insert the batteries into the bay in the direction indicated in the battery compartment.
4.Replace the battery bay cover. You will hear it click into place.
10 | Power supply |