UCommand-616 Universal Remote Control User’s Manual
∙This User’s Manual
If any of the above items are missing or appear damaged, contact your dealer immediately. Do not throw the shipping carton away in case you need to ship your
Quick Start
If you are already familiar with the basics of teaching commands to universal remote controls, you can skip reading the next few chapters right now and get started on programming right away. The following procedure applies to almost all functions of the
For detailed Programming/Learning instructions, see page 26
To program the
1.Turn on the remote by pressing any hard button.
2.Press and hold the menu button until the Setup menu appears.
3.Scroll down to the Program item using the CH+ and CH- buttons, and select it by pushing the mute button.
Pressing menu always returns you to the previous menu.
4.Select the Learning function from the Program menu.
5.Select the Device you want to learn.
6.Point the signal eye of your Device remote control at the
7.A screen appears showing the layout of the Direct Access Buttons (also referred to as hard buttons) on the handle of the
8.Press the corresponding button on your Device remote con-
trol, while keeping it aimed at the Learning eye. For example, the first button to be learned on the
Button 
, which equates to your Device On/Off button.
2 | Quick Start |
