Chapter 4—Programming and Customizing the UCommand-616
Using macros
The Macro feature allows you to create up to 12 macros and store up to 25 commands for each. You can setup, relabel, and delete macros from the Macro submenu. Once you have created a macro, you will be able to run many commands by pushing only one button.
1.From the Setup menu, scroll to Macro and press ENTER. You see a list of macros:
Macro
Macro 01
Macro 02
Macro 03
Macro 04
Figure 4-19: The macro list
2.Scroll to one of the macros in the list and press ENTER. You see the following screen:
Macro
Setup
Relabel
Delete
Figure 4-20: The macro menu
Procedures are described below.
Using macros | 43 |
