UCommand-616 Universal Remote Control User’s Manual
Macro setup
Follow these instructions to set up a macro:
1.From the Macro menu, scroll to Setup and press ENTER. The macro is now in record mode, and all buttons pressed next are added to the macro.
2.Press the device button combination that you want to be re- corded into the macro.
3.If necessary, you can set a time delay between each com- mand in the macro. In the upper right corner of the screen, there is an hourglass 6 icon. After pressing a command, press the 6 icon to display the following screen:
Macro 
0.51
SecSec
2 | 3 |
Sec | Sec |
5 | 7 |
Sec | Sec |
1015
SecSec
Select one of the listed durations (0.5 seconds to 15 seconds) to add a time delay between device commands.
4.When you have finished recording the macro press ENTER; the following screen displays, and the macro is complete.
44 | Using macros |
