![](/images/new-backgrounds/1290168/290168127x1.webp)
UCommand-616 Universal Remote Control User’s Manual
You cannot operate a | ∙ Make sure that you have correctly “mapped” | |
device even after | your device’s remote control to the | |
configuring the device |
|
|
using the learning | ∙ Clear the device data from the | |
function (page 26). | ||
| the learning function again (page 26). | |
| ∙ Some original remotes have an unstable | |
| timing, which cannot be learned. Try learn- | |
| ing the commands from a different remote | |
| control, such as a universal remote, config- | |
| ured to control the respective device. | |
You see an “error” | ∙ Try the learning procedure again (page 26). | |
display during the | If the remote is FULL, remove any buttons | |
learning procedure. | or devices you feel unnecessary. | |
|
| |
You see an “error” | ∙ The button that you pressed has not been | |
display during opera- | properly configured. Configure the button | |
tion. | again using the learning procedure (page | |
| 26). |
|
Problems with two- | ∙ Some remotes use a string of commands to | |
way remotes and | trigger certain functions. This is especially | |
DSP | true of DSP (surround sound) functions. Try | |
| programming the | |
| turned off, or do the programming in another | |
| room. Alternately, during the Learning se- | |
| quence, quickly move the remote away from | |
| the 616 after sending the original command. | |
The LCD screen | ∙ The | |
turns off. | tory to automatically switch the LCD off after | |
| 20 minutes if left unused. Press the Hard- | |
| ware Access Button | or any other hard |
| button to turn the | |
| again. |
|
Short battery life | ∙ This is usually caused by heavy use of the | |
| backlight function, which mainly determines | |
| the battery life (see pages 11 and 50). |
56 | Troubleshooting |