IMPORTANT UNPACKING INSTRUCTIONS

This package contains a Cuisinart® Premier Series 11 Cup Food Processor, and the standard parts for it:

Work bowl, work bowl cover, large and small pushers, PowerPrep® Metal Dough blade, metal chopping/mixing blade, slicing disc, shredding disc, detachable disc stem for discs, spatula, How-to DVD and recipe/instruction book.

CAUTION:

THE CUTTING TOOLS HAVE VERY SHARP EDGES. To avoid injury when unpacking the parts, please follow these instructions.

1. Place the box on a low

table or on the floor

next to the kitchen

counter or table where

you intend to keep the

food processor. Be

sure the box is right

side up.

2. Remove the cardboard

insert. You will see a

5.The PowerPrep® Metal Dough Blade (C) rests in a cavity on the oppo- site side of the foam block. Remove it from the foam.

6.The plastic Spatula (D) is on one long side of the foam block. Remove it next.

7.The Slicing Disc (E) is on the edge of one of the long sides of the foam block; the Shredding Disc (F) is on the other side. Slide them out WITH GREAT CARE; THE BLADES ARE VERY SHARP.

8.Lift out the DVD from its space on one side of the foam block.

9.Lift out the foam block.

10.Remove the instruction/ recipe book.

11.The housing base with work bowl, metal blade and cover are at the bottom of the box. The metal blade is loose in the work bowl beneath a foam insert. Do not reach into feed tube. Do not turn over work bowl without first removing metal blade. Remove work bowl cover by turning it clockwise and lifting.

instructions thoroughly before using the machine.

14.Save the shipping cartons and plastic foam blocks. You will find them very useful if you need to repack the processor for moving or other shipment.

Please watch the enclosed How-to DVD before using the food processor.

NOTE: Remember to return your completed product registration card with all information care- fully filled out.

WHEN

REMOVING BLADE:

CAREFULLY REMOVE THE METAL BLADE BY GRASPING THE CENTER WHITE HUB AND LIFTING IT STRAIGHT UP. NEVER TOUCH THE BLADES, AS THEY ARE RAZOR SHARP.

rectangular block of

plastic foam that holds

the processor parts,

each fitted into a cavity

in the foam.

3. The Detachable Disc

Stem for the discs (A)

sits in a cavity in one

corner of the foam

block. Remove this

first.

4. The Pusher Assembly,

with large and small

pushers, (B) sits in the

adjacent cavity.

Remove this next.

12. Remove the base and bowl together

by grasping the

plastic bowl at the top with both hands

and lifting the bowl straight up. Do not rotate the bowl clock- wise on the base. This will cause the bowl to separate from the base.

13.Place the food proces- sor on the counter or table. Remove foam cylinder insert from top of metal chopping blade. Read the

2

Page 3
Image 3
Cuisinart DLC-2011N Place the box on a low, Table or on the floor, Next to the kitchen, Counter or table where, Side up