For the camera to be connected directly to
the computer and used as a remote
imaging device, the computer must be
equipped with a USB port as a standard
interface. The computer and the operating
system must be guaranteed by their
manufacturers to support USB interface.
See chart for system requirements.
The remote-camera driver software must
be installed. Specific application software,
such as Microsoft Net Meeting, is required
to view the images. This function cannot
be used with Macintosh computers.
118
REMOTE CAMERA SYSTEM REQUIREMENTSINSTALLING THE REMOTE CAMERADRIVER
The driver needs only to be installed once. This
driver is not compatible with Macintosh operating
systems.
Before connecting the camera to the computer,
place the DiMAGE Viewer CD-ROM in the CD-
ROM drive. The DiMAGE installer menu should
automatically activate. To install thedriver, click on
the “Starting up the DiMAGE remote camera
driver installer” button.
DATA-TRANSFER MODE
Minimum system requirements
Pentium II 300MHz or later
Windows®XP, 2000 Professional,
Me, and 98 Second Edition
128MB of RAM. 256MB with Windows®XP.
200MB of hard-disk space
800 X 600 16-bit color monitor
Remote camera tested with Microsoft Net
Meeting and Windows Messenger