94 SETUPMODE
To make a custom recording, select either focus signal or
shutter FX from the Cust. FX rec. option on the setup
menu. Messages will appear during the routine.
CUSTOM FX RECORDING
Apersonalized sound effect can be recorded for the focus signal and shutter release. The
camera uses an audio signal to indicate the camera has focused.
Audio signals
Shutter FX
CustomRecord
Volume
Power off
1
1
Focus signal
Shutter FX
3 min.
Press the shutter-release button to begin the recording
of the shutter sound effect.
Press shutter button
to record.
Microphone
Recording audio.
Press shutter to stop.
Remaining recording time
During the recording, hold the camera’s microphone
approximately 20cm (8 in.) from the audio source.
Up to four seconds of audio can be recorded. The
remaining recording time is indicated by a status bar
and the frame counter on the monitor. The recording
will end when the shutter-release button is pressed
again or recording time has elapsed.
The length of the recording will affect the
performance of the camera. The longer the recorded
sound effect, the longer the delay between image
capture. This can have a significant affect on the
continuous-advance frame rate.