CyberHome Entertainment CH-DVD 452 manual Operation of rear panel

OPERATION

Operation of rear panel

1 2 3 4 5 6 7

8

1.COAXIAL: Digital coaxial audio output for connection to a digital audio device (amplifier/receiver). Please note that the amplifier/receiver has to be compatible to Dolby Digital, MPEG and/or PCM (for more information please refer to the manual of your amplifier/receiver).

2.AUDIO OUT L/R: Analogue 2-channel audio outputs (white/red socket) for connection to a television, AV receiver, beamer or stereo system.

3.VIDEO: Composite video output (yellow socket) for connecting to a TV or AV receiver with a video input (CVBS, compos- ite video) by an audio/video cable.

4.RGB / SCART: For connection to a television or monitor that is compat- ible with this kind of connection by means of a 21-pin SCART cable. This connection enables the output of audio and video signals.

ENG

5.REGION CODE: Indicates that the device is set to DVD region code “2”.

6.P-SCAN:High quality video output for connection to the compo- nent video inputs of a television, AV receiver, beamer or monitor by means of a YCbCr connecting cable. Please note that the Progressive Scan signal is only available over the component video output.

7.AC IN: This device has a fixed power cord. Plug the other end of the fixed power cord into the wall socket.

8.S-VIDEO:S-Video output for connecting to a TV or AV receiver with S-Video input by an S-Video cable. The S-Video output can be used instead of the video output. By this, a high- er video quality can be reached than with composite video.

13