USER PREFERENCES
Language Video Audio Security General Video settings
Brightness 0
Press ‘ENTER’ to return
Language Video Audio Security General Video settings
Contrast 0
Press ‘ENTER’ to return
Language Video Audio Security General
Audio setup page
Downmix | STR |
SPDIF output | RAW |
Dual mono | STR |
Dynamic |
|
Go to audio setup page
Language Video | Audio | Security | General |
|
|
|
|
Audio setup page |
|
|
|
Downmix | STR | LT/RT |
|
SPDIF output | RAW | Stereo |
|
Dual mono | STR |
|
|
Dynamic |
|
|
|
Set the downmix mode
Language Video | Audio | Security General |
|
|
|
Audio settings |
|
|
Downmix | STR | SPDIF off |
SPDIF output | RAW | SPDIF/RAW |
Dual Mono | STR | SPDIF/PCM |
Dynamic |
|
|
Set the SPDIF output
Brightness
To adjust the intensity of light emitted. The setting range for the picture bright- ness is from
Contrast
Adjustment of the picture contrast. The contrast is decisive for the overall dis- play. Light spots should stand out clearly from dark spots without loosing the strength of the picture. The setting range for the picture brightness is from
Changing the audio settings
Highlight the menu point you would like to set in the menu “Audio”. Press the button “ENTER” to enter a menu. Use the button “C” or “D” to select the required sound setting and press “ENTER” to confirm your selection. You can leave the menu at any time by pressing the button “B” on your remote control.
Downmix
Since most DVD discs feature Dolby Digital 5.1 channel soundtracks, you will need to use the Downmix options. You have the following setup options:
LT/RT: If you set to LT/RT, a mixed signal of the surround signal will be pro- duced on the left and right output. The left output signal consists of the front left signal plus centre and the sum signal of the left and right signal of the surround speakers. The right output signal consists of the front right signal plus sub- woofer plus the difference signal of the left and right signal of the surround speakers. This setting should be used only with Dolby Pro Logic receivers capable of decoding this signal type.
Stereo: If you plan to use the Stereo Analog outputs for a connection to a TV or receiver, you must enable this setting to downmix the 5.1 channel sound- tracks of most DVD movies to a stereo format. If you set to Stereo, the left sig- nal consists of the front left signal plus surround left signal and sum signal of the centre and subwoofer. The right signal consists of the front right signal plus surround right signal and sum signal of the centre and subwoofer. This setting should be used for most televisions and Stereo Audio equipment.
SPDIF Output
SPDIF (Sony / Philips Digital InterFace) refers to the digital audio format used by most consumer electronics equipment, as well as the coaxial and optical dig- ital audio output connectors.
SPDIF off: Please select this option to switch the digital output off. Please note that the analogue outputs are still enabled.
44
