CyberHome Entertainment CH-DVD 452 manual Changing the general settings, Change PSW, Parental

USER PREFERENCES

Language	Video	Audio Security General
Security setup page
Change PSW		Change
Parental		8

Change the passwort

Language Video Audio Security General

Security setup page

Change PSW		1.Kid safe
Parental	8	2.G

3.PG 4.PG 13 5.PGR 6.R 7.NC 17 8.Adults

Set Parental Control

Language Video Audio Security General

General setup page

Angle mark	On
Captions	Off
Memory	Off
Version
Default

Change PSW

In this menu you can create a new password or later change your existing password. To set the password, please highlight “Change PSW” and press the right direction button to highlight “Change”. Press then “ENTER” to open the password page.

When setting up a password the first time, you will be asked to enter the facto- ry-set password “0000”. If you change the password at a later date, you will be asked to enter the last stored password at first. Choose a 4-digit numeric pass- word and write it down in case you forget it.

In order to activate the new password, please leave the setup menu. When pressing again the “SETUP” button, the new password is activated.

Notes:

•The factory-set password is “0000”. You can use this further on or change it.

•If you have forgotten your password, you can enter the master password “1389”. Please keep in mind that your player may not be secure if this manu- al is accessible by your children.

Parental

The parental lock allows you to limit the use of your player to only those DVD discs that do not exceed the rating you specify. When the parental control is set, DVD discs that support this feature will play only after the password has been entered. However, typically only discs produced by major entertainment com- panies support parental control. Discs not supporting this feature will be “immune” to the lock-out.

Attention:

This feature has to be supported by the DVD! However, typically only DVD discs produced by major entertainment companies support parental control. DVD discs not supporting this feature will be “immune” to the lock-out.

Use the buttons “C” or “D” to select the required parental level and press “ENTER” to confirm your selection. You can choose from 8 levels of parental control, corresponding to the standard rating system. The lower the value is, the more strict the limitation. If no parental control is required, please select “8. Adults”.

To activate the set parental level, please leave the setup menu. When pressing again the “SETUP” button, the parental lock is activated.

Changing the general settings

Highlight the menu point you would like to set in the “General” menu. Please press “ENTER” or the right direction button to enter a menu. Use the buttons “C” or “D” to select the required setting and press “ENTER” to confirm your selection. You can leave the menu at any time by pressing the button “B” on your remote control.

Go to general setup page

46