Audio Setup Options | CyberHome Entertainment CH-RDV 2000 manual

Audio Setup Options

ANALOG - 5.1CH / 2CH

The ANALOG setting controls the DVD Player’s Analog Audio Outputs. These are the Stereo Audio and 5.1 Channel Outputs covered on pages 11, 13 & 15. Select 5.1CH if you are using the 5.1 Channel outputs to connect to a Dolby-Ready Receiver or Speaker System. If you are using a TV for audio or a stereo system with only two channel inputs, this setting should be switched to 2CH, allowing you to hear all channels of Dolby/DTS 5.1 soundtracks through two speakers.

DIGITAL - DOLBY / DTS / LPCM

Most DVDs are produced with Dolby or DTS 5.1 Channel soundtracks. So, normally this setting should be at the default of DOLBY/DTS. However, this setting can be set to LPCM to support DVDs featuring this type of audio format. LPCM, or Linear Pulse Code Modulation, is a stereo digital audio format typically used only with CD audio.

For Help on Using the Setup Menu, see pg 37.

ANALOG 5.1CH

LANG.

DIGITAL DOLBY/DTS

VIDEO

D.R.C STANDARD

AUDIO

BASS OFF

CHILD

OTHERS

EXIT

ENTER RETURN SETUP

D.R.C - STANDARD / MAXIMUM / TV MODE

Sometimes called “midnight mode”, D.R.C (Dynamic Range Compression) aims to make watching a movie at low volumes more enjoyable by boosting the quieter sounds while suppressing the louder sounds. This reduction in the difference between the low and high audio levels is known as “compression”. You can adjust the level of this compression in three levels: MAXIMUM - Highest compression, STANDARD - Normal compression, and TV MODE - Optimized for smaller speakers.

BASS - OFF / SMALL / LARGE

You can tailor the bass response of your Sub-Woofer different room sizes with the BASS setting. The options are: OFF - No additional processing of the sub-woofer signal, SMALL - Adjusts the sub-woofer output for small rooms, and LARGE - Adjusts the sub-woofer output for large rooms.

40

Image 40

CyberHome Entertainment CH-RDV 2000 owner manual Audio Setup Options, Analog 5.1CH / 2CH, Digital Dolby / DTS / Lpcm

Contents

DVD Player w/ CD-RW Important Safety Instructions Important Safety Instructions Cont’d Class 1 Laser Product Table of Contents DVD Player Features & Supported Discs Caring for Optical Discs Preparing and Using the Remote Control Installing the BatteriesOperation of Remote Control Important Note about Batteries Remote Control Functions 1 Remote Control Functions 2 DVD / CD-RW Front Panel Functions DRV DVD Display Functions Dimming the Front VFD Display Back Panel Connectors Connecting the DVD Player to your TV / Receiver Determining the Video & Audio Connections You Will UseTelevision Connections One Required Receiver/Speaker Connections Optional Connecting to a TV with S-Video In and Stereo Audio Composite / S-Video & Stereo Audio Connections Connecting to a TV with Component Video Inputs Enter the Setup Menu to Change the Video SettingConnect the DVD Player using the Component Video Cables Component Video Connections Using the Dolby/DTS 5.1 Channel Analog Outputs Dolby/DTS 5.1 Channel & Digital Audio Connections Getting Started Powering On & Playing a Disc Stopping and Pausing Play Pausing Disc PlayAllows you to step through the video in frame-by-frame mode To Stop Disc Play Navigating Disc Menus Skip Forward and Skip Back Slow Motion ScanningAdvancing to the Next Track or Skipping Back Through Tracks Next and Previous Track Buttons Jumping to a Specific Chapter/Track or Time Position Select the Goto ButtonNavigating the Goto Menu Press Enter to Jump to the Location Previewing Titles, Chapters or Tracks Before Playback Saving Locations for Quick Play with Bookmarks Using the Repeat 1/ALL Button Using the Repeat A-B ButtonRepeating a Title, Chapter/Track or Disc Repeating a Specific Time Segment Playing Tracks in a Particular Order with Program Play Create Custom Playback Programs of up to 30 StepsSelect the Program Button during Playback Add a Track to the Program List with Enter Playing MP3 Files with the MP3 Navigator Viewing JPG Files on Your TV Using the Zoom Function More Audio & Video Functions Press the Display Button while a Disc is Playing Putting it All Together with the Display ButtonDisplay Menu Options with DVD, VCD and CD Audio Discs Introduction to File Copy and Disc Duplication Copy and Record Function Buttons On-Screen Burner Interface Quickly and Easily Perform Disc/File Copy Operations Duplicating a Disc with Disc Copy Make a Copy of a CD-ROM, Audio CD, MP3 or JPG DiscEnter the Burner Interface with the Burner button Navigate to the Open / Close Icon Selecting and Copying Files With an Audio CD inserted Select the Files or Tracks to Copy Selecting and Copying Files Cont’dBegin the Copy Operation Erasing a CD-RW Disc Quick EraseFull Erase BURNEREnter the Burner Interface with the Burner button About Multi-Session Discs Selecting a Session Using the On-Screen Setup Menu Parental Lock and Other Options Video Setup Options System Ntsc / PALAspect 43 PS / 43 LB / 169 WS Output Composite / S-VIDEO / YCbCr Audio Setup Options C Standard / Maximum / TV ModeAnalog 5.1CH / 2CH Digital Dolby / DTS / Lpcm Setting Language Options for Setup and DVDs Language Setup OptionsD Deutsch / Español / Italiano / Francais Troubleshooting Common Problems Specifications Glossary of DVD-Related Terms Glossary of DVD-Related Terms cont’d Index Glossary 44-45