CyberHome Entertainment CH-RDV 2000 owner manual Back Panel Connectors

Back Panel Connectors

Connections on the Back Panel

The back panel is where you’ll find all the physical connections for the DVD Player. You will only use one Video and one Audio connection at any given time. For instance, if you’re using the Composite Video jack to connect to your TV, the S-Video and Component connectors will be unused.

Component Video Connectors

Y, Pr & Pb connectors for use with TVs compatible with Component Video.

Composite Video Connector

Typical connection. Connect Yellow cable to TV Video In.

Dolby/DTS 5.1 Channel Outputs

Connect to Dolby-Ready Receiver or Speaker System.

Y

Pb

Pr

	Stereo Analog Audio Outputs				AC Power Inlet
					Insert the power cord here first. Then,
	Use White/Red Audio Cable to connect				plug other end to AC Outlet (100-230V).
	to Audio In (L/R) of TV or Receiver.
			DTS/DOLBY 5.1CH DIRECT OUTPUT			AC SWITCH
	DIGITAL OUTPUT	ANALOG OUTPUT				ON
			FRONT		SURROUND SUB WOOFER
						I
VIDEO	OPTICAL COAXIAL	R	CAUTION	R	AC IN
						O
OUT					100V-230V
			RISK OF ELECTRIC SHOCK
			DO NOT OPEN		50Hz/60Hz
S-VIDEO		L		L		OFF
OUT
					CENTER
VIDEOVIDEO	AUDIOAUDIO				VIDEOAUDIOAUDIO
	CoAxial Digital Audio Connector
	Use special CoAxial Digital Audio Cable to				AC Power Switch
	connect to Digital Receiver’s CoAxial Input.				Turns the main power OFF/ON. Must
					be set to ON for unit to operate.
	Optical Digital Audio Connector
	Use special Optical Digital Audio Cable to
	connect to Digital Receiver’s Optical Input.

S-Video Connector

Use special S-Video Cable to connect to TV’s S-Video In jack.

12