Manuals / CyberPower Systems / Computer Equipment / Network Card

CyberPower Systems Network Management Card user manual

Models: Network Management Card

1 21

Download 21 pages 32.55 Kb

Page 13

[Weekly]: Set a specific day and time of the week for UPS shutdown.

CyberPower Network Management System

[UPS Schedule]: Sets the UPS to automatically shutdown and restart at consistent times - weekly or daily.

[Special Shutdown]: The user may set a specific date and time for UPS shutdown.

[Weekly]: Set a specific day and time of the week for UPS shutdown.

[Daily]: Set a specific time of the day for UPS shutdown.

1.Click [Special], [Daily] or [Weekly] scheduled shutdown features to enter each setup menu.

2.Enter the date and time to shut down the UPS. Please note that time is entered using 24Hr clock format (hh:mm).

3.Select [Never], [Immediately], [Same Day], [Next Day] for the UPS to recover power.

4.Click [Add] to add the item to the Schedule. Click [Cancel] to remove the item from the Schedule.

5.Applied settings are listed in [Schedule Log] menu.

Please Note: The management system allows only 10 scheduled settings.

11

Image 13

CyberPower Systems Network Management Card user manual Weekly Set a specific day and time of the week for UPS shutdown

Contents

User’s Manual Network Management Card managed,monitored,and configured via SNMP Card Configuration ToolIntelligent Network Management Card allows UPS to be TABLE OF CONTENTS INTRODUCTION FeaturesOverview System Requirementsz PowerPanel Shutdown Service Software and user manuals CD z CyberPower Network Management CardCyberPower Network Management System UnpackingDefinitions for LED Indicators 7 10M Ethernet connectorz Description Step 1. Hardware Installation INSTALLATION GUIDEFigure 3. Authentication window Figure 2. The SNMP card setting windowMethod 2 Use DOS Mode Setting CONFIGURATION GUIDE UPS Information provides the technical specifications of your UPS To turn off the UPS no power output from the outlets test will automatically stop when the batteries are lownumber between 1-99. The UPS will shut off and wait Weekly Set a specific day and time of the week for UPS shutdown 2. Click Apply to activate the settings Identification assign the system’s name, contact, and location of the system 2. Input the community functions as password, maximum of 15 characters Red：Severe 3. Select one option Enable or DisableUPS Shutdown Configures UPS shutdown and PC safe shutdown times CyberPower Network Management System 1. Locate the subnet of CyberPower Network Management Card Appendix 1 IP Address Settings of CyberPower Network Management Card2. Select an IP Address for CyberPower Network Management Card OverviewPinging 192.168.20.240 with 32 bytes of data CyberPower Network Management SystemReply from 192.168.20.240 bytes=32 time10ms TTL=64 Reply from 192.168.20.240 bytes=32 time10ms TTL=64