Manuals / CyberPower Systems / Computer Equipment / Network Card

CyberPower Systems Network Management Card user manual Click Apply to activate the settings

Models: Network Management Card

1 21

Download 21 pages 32.55 Kb

Page 14

2.Click [Apply] to activate the settings.

CyberPower Network Management System

[System] menu contains, [System Time] page [User Accounts] page and [Identification] page.

[System Time] allows users to configure the internal time of the Network Management Card。

1.Enter the date and time and choose either Celsius or Fahrenheit for the temperature display.

2.Click [Apply] to activate the settings.

[User Accounts] sets up user accounts. The system allows one administrator and two device users to access the system. An administrator can access all of the management menus. A device user can only access [Monitoring], [Events], and [Summary]. Only one user at a time can enter into the web browser.

1.Select [Administrator] / [Device User] and enter the User Name and Password.

2.Click [Apply]. – Are steps 2 and 3 in the correct order?

3.Retype the password to confirm the password was keyed properly.

12

Image 14

CyberPower Systems Network Management Card user manual Click Apply to activate the settings

Contents

Intelligent Network Management Card allows UPS to be managed,monitored,and configured via SNMP Card Configuration ToolUser’s Manual Network Management Card TABLE OF CONTENTS Overview FeaturesINTRODUCTION System RequirementsCyberPower Network Management System z CyberPower Network Management Cardz PowerPanel Shutdown Service Software and user manuals CD Unpackingz Description 7 10M Ethernet connectorDefinitions for LED Indicators INSTALLATION GUIDE Step 1. Hardware InstallationFigure 2. The SNMP card setting window Figure 3. Authentication windowMethod 2 Use DOS Mode Setting CONFIGURATION GUIDE UPS Information provides the technical specifications of your UPS test will automatically stop when the batteries are low To turn off the UPS no power output from the outletsnumber between 1-99. The UPS will shut off and wait Weekly Set a specific day and time of the week for UPS shutdown 2. Click Apply to activate the settings Identification assign the system’s name, contact, and location of the system 2. Input the community functions as password, maximum of 15 characters 3. Select one option Enable or Disable Red：SevereUPS Shutdown Configures UPS shutdown and PC safe shutdown times CyberPower Network Management System 2. Select an IP Address for CyberPower Network Management Card Appendix 1 IP Address Settings of CyberPower Network Management Card1. Locate the subnet of CyberPower Network Management Card OverviewReply from 192.168.20.240 bytes=32 time10ms TTL=64 CyberPower Network Management SystemPinging 192.168.20.240 with 32 bytes of data Reply from 192.168.20.240 bytes=32 time10ms TTL=64