Manuals / CyberPower Systems / Computer Equipment / Network Card

CyberPower Systems Network Management Card user manual

Models: Network Management Card

1 21

Download 21 pages 32.55 Kb

Page 10

[UPS Information] provides the technical specifications of your UPS.

CyberPower Network Management System

[UPS Information] provides the technical specifications of your UPS.

Information	Description
Model Name	Displays the UPS’s model number

Voltage Rating	Identifies the current AC voltage to the UPS.

Working Frequency	Displays the current frequency of the UPS.

Power Rating	Displays the capacity of the UPS in VA.

Load Power	Identifies the capacity of the UPS in Watts.

Battery Voltage Rating	Displays the DC voltage of the battery.

Firmware Version	Shows the firmware version of the UPS.

Self-test Date	Displays the date of last self-tests

Self-test Result	Displays the latest self-test result.

Please Note: [Self-test Date] and [Self-test Result] will only display when a self-test has been set or performed.

8

Image 10

CyberPower Systems Network Management Card user manual UPS Information provides the technical specifications of your UPS

Contents

User’s Manual Network Management Card managed,monitored,and configured via SNMP Card Configuration ToolIntelligent Network Management Card allows UPS to be TABLE OF CONTENTS Overview FeaturesINTRODUCTION System RequirementsCyberPower Network Management System z CyberPower Network Management Cardz PowerPanel Shutdown Service Software and user manuals CD UnpackingDefinitions for LED Indicators 7 10M Ethernet connectorz Description INSTALLATION GUIDE Step 1. Hardware InstallationFigure 2. The SNMP card setting window Figure 3. Authentication windowMethod 2 Use DOS Mode Setting CONFIGURATION GUIDE UPS Information provides the technical specifications of your UPS test will automatically stop when the batteries are low To turn off the UPS no power output from the outletsnumber between 1-99. The UPS will shut off and wait Weekly Set a specific day and time of the week for UPS shutdown 2. Click Apply to activate the settings Identification assign the system’s name, contact, and location of the system 2. Input the community functions as password, maximum of 15 characters 3. Select one option Enable or Disable Red：SevereUPS Shutdown Configures UPS shutdown and PC safe shutdown times CyberPower Network Management System 2. Select an IP Address for CyberPower Network Management Card Appendix 1 IP Address Settings of CyberPower Network Management Card1. Locate the subnet of CyberPower Network Management Card OverviewReply from 192.168.20.240 bytes=32 time10ms TTL=64 CyberPower Network Management SystemPinging 192.168.20.240 with 32 bytes of data Reply from 192.168.20.240 bytes=32 time10ms TTL=64