CyberPower Systems Network Management Card Introduction, Overview, Features, System Requirements

CyberPower Network Management System

INTRODUCTION

Overview

The CyberPower Network Management Card is an external card that allows remote monitoring and control of a UPS on a network. After installing the hardware and configuring an IP address, the user can access, monitor and control the UPS from anywhere in the world! No software installation is needed. Simply use a web browser such as Internet Explorer or FireFox to access your UPS. Servers and workstations protected by the UPS can be installed with PowerPanel® Shutdown Service software to utilize the additional remote shutdown features of the Network Management Card.

Features

zRemote management and configuration of UPS via Web Browsers or NMS

zSupports TCP/IP, UDP, SNMP, HTTP protocols

zAutomatic events notification via SNMP Traps

zFlexible Event Action setting

zAuto-shutdown to protect servers and workstations from data loss due to power failure

zSchedule shutdown/startup/reboot of UPS remotely

zEvent logging to trace UPS operation history

zSNMP MIB provided

z10Mbps Ethernet compatible

zQuick installation and user friendly interface

zSecurity management provided

System Requirements

zA computer with a Windows Operating System (for optional PowerPanel® Shutdown Service)

zAn Ethernet cable connection to an existing network

zNMS (Network Management Station) compliant with SNMP (for optional NMS management)

zA RS232 cable to connect the CyberPower Network Management Card with the UPS

Application:

1