12
5. (See the printed Quick Installation Guide included with the network
adapter.)
6. Install the D-Link DWL-G650 wireless Cardbus adapter into a laptop
computer. (See the printed Quick Installation Guide i ncluded with the
DWL-G650.)
7. Install the D-Link DFE-530TX+ adapter into a desktop computer. The four
Ethernet LAN ports of the DI-624S are Auto MDI/MDIX and will work with
both Straight-Through and Cross-Over cable.
(See the printed Quick Installation Guide included with the DFE-530TX+.)
Connect your printer to the printer port on the DI-624S. Please refer to the quick
installation guide for loading the print server software.
Installing the Print Server To avoid any problems that may arise when you install your USB printer, follow this
procedure. If the print server is powered on before a network connec tion is established,
configuration problems may arise.
1. Before connecting your printer to the DI-624S, make sure that your printer is
functioning properly.
2. Once you have made sure that it is working properly, turn off the power to the
printer.
3. Confirm that your computer network is funct ioning properly.
4. Connect the DI-624S to your network, using a stan dard Ethernet cable. Leave
the router powered off.
5. While the printer is still powered off, connect the print er to one of the available
USB slots at the rear of the router.
6. Power on your USB printer.
7. Plug the power adapter into the available power adapter slot at the back of the
router.
8. Plug the other end of the power adapter into an a vailable power outlet. This will
supply electricity to the Router since there is no external power switch. The
corresponding green USB LED at the front of th e router should light green,
indicating a valid connection to the router.
To configure the router for use on your LAN, please go to the Advanced section of this
manual, under the heading Home > LAN.