Using the Configuration Menu (continued)
Dynamic IP Address
Dynamic | Choose Dynamic IP Address to obtain IP address information |
| automatically from your ISP. This option should be selected if your ISP |
| has not supplied you with an IP address. This option is commonly used |
| for Cable modem services. |
Host Name | The Host Name is optional but may be required by some ISPs. The |
| default host name is the device name of the Router and may be |
| changed. |
MAC Address | The default MAC Address is set to the WAN’s physical interface MAC |
| address on the Broadband Router. It is not recommended that you |
| change the default MAC address unless required by your ISP. |
Clone MAC Address | The default MAC address is set to the WAN’s physical interface MAC |
| address on the Broadband Router. You can use the “Clone MAC |
| Address” button to copy the MAC address of the Ethernet Card |
| installed by your ISP and replace the WAN MAC address with the MAC |
| address of the router. It is not recommended that you change the |
| default MAC address unless required by your ISP. |
Primary/Secondary | Enter a DNS Address if you wish not to use the address provided by |
DNS Address | your ISP. |
MTU | Enter an MTU value only if required by your ISP. Otherwise, leave it at |
| the default setting. |
19
