Manuals / D-Link / Computer Equipment / Switch

D-Link DKVM-IP1 manual The following information has to be given to mount the image properly

Models: DKVM-IP1

1 73

Download 73 pages 5.65 Kb

Page 35

The following information has to be given to mount the image properly:

Figure 6-6. Selecting CD ROM

Figure 6-7. Select Windows Share

The following information has to be given to mount the image properly:

Share host The server name, or its IP address.

Share name The name of the share to be used.

Path to image The path of the image file on the share.

User (optional) If necessary, specify the user name for the share named before. If unspecified, and a guest account is activated, this guest account information will be used as your login.

Password (optional) If necessary, specify the password for the given user name.

To register the specified file image and its location click on the button “Set”.

The specified image file is supposed to be accessible from the DKVM-IP1 switch. The information above has to be given from the point of view of the DKVM-IP1 switch. It is important to specify correct IP addresses, and device names. Otherwise, DKVM-IP1 switch may not be able to access the referenced image file.

Furthermore, the specified share has to be configured correctly. Therefore, administrative permissions are required. As a regular user you may not have these permissions. You should

32

Image 35

D-Link DKVM-IP1 manual The following information has to be given to mount the image properly

Contents

D-Link DKVM-IP1 1 Port KVM Switch Over IP Manual VersionCONTENTS Unit Reset Change Password6.4 Setting Update FirmwareVideo modes 1. The quick installation guideInstallation DKVM-IP1 switch hardware installationTable 1-2 Serial parameters Initial IP configurationWeb interface Table 1-1 Initial configurationRemote Console 2. Introduction 2.1. When the server is up and running2.2. When the server is dead Table 2-1Host system failures and how they are detected 2.3. Features2.4. Package contents 2.6. System requirement 2.5. Technical specificationsDKVM-IP1 1port KVM Switch Over IP Model NoUSB 2.0 Cable 2.7. Cable diagrams PS/2 CableCAT5/5E/6 Straight Through UTP/STP Cable 8P8C 2.8. LED Indicators VGA CableStep 3. Hardware installation3.2 Connecting DKVM-IP1 switch to the host system 3.1 Operation OverviewStep StepStep StepEthernet Cable Modem Step 8 Option3.2.1 Ethernet connection StepPage DKVM-IP1 switch Setup Tool 4. Configuration4.1 Initial Configuration 4.1.1 Initial configuration via DHCP server4.1.2 Initial configuration via serial console AuthenticationIP address IP auto configuration4.1.3 Keyboard, Mouse and Video configuration 4.1.3.1 DKVM-IP1 switch keyboard settingsFast Sync 4.1.3.2 Remote Mouse Settings4.1.3.4 Host system mouse settings 4.1.3.3 Auto mouse speed and mouse synchronizationSpecial Mouse Driver Windows XP Mouse Settings4.1.3.5 Single and Double Mouse Mode 4.1.3.6 Recommended Mouse SettingsTelnet 5. Usage5.1 Prerequisites HTTP/HTTPSTable 5-1. Standard user settings 5.2 Login into the DKVM-IP1 switch and logout5.2.1 Login into the DKVM-IP1 switch Figure 5-2. Login screenNavigation 5.3 The Remote Console General description 5.2.2 Logout from the DKVM-IP1 switch5.4.1 Remote Console Control Bar 5.4 Main WindowFigure 5-6. Remote Console Options Menu Exclusive AccessLocal Cursor ScalingMouse Handling Video Settings Soft Keyboard Figure 5-13. Soft Keyboard Mapping Local KeyboardHotkeys Encoding5.4.2 Remote Console Status Line Figure 5-17. Status line transfer rate 6.1.2 Telnet Console 6. Menu Options6.1 Remote 6.1.1 KVM Console terminal helpquit versionUse Image on Windows Share SAMBA 6.2 Virtual Media 6.2.1 Mapping6.2.2 CD ROM Upload a Floppy ImageThe following information has to be given to mount the image properly Windows 2000/XP MS Windows Creating an Image Floppy ImagesUNIX and UNIX-like OS dd if=/dev/fd0 of=/tmp/floppy.imageFigure 6-11. Nero selection dialog dd if=/dev/cdrom of=/tmp/cdrom.imageMS Windows Figure 6-12. Selecting Drive Redirection 6.2.3.1 Driver Installation6.2.3 Drive redirection Figure 5-17. KVM Vision Viewer Setup step 6.2.3.2 Create a New Device 6.2.3.3 Drive Redirection Settings 6.2.4 Options 6.3.2 Users 6.3.1 Change Password6.3 User 6.4.1 User Console 6.4 SettingsFigure 6-14. User Console Settings Part Remote Console Type Specifies, which Remote Console Viewer to use 6.4.2 Keyboard/Mouse Mouse Speed Auto mouse speed the host bios must have USB keyboard supportPS/2 Keyboard Model USB Mouse Type6.5.1 Network 6.5 Network6.4.3 Video Figure 6-19. Network Settings Part Remote Console And HTTPS port Figure 6-21. Dynamic DNS Scenario 6.5.2 Dynamic DNSFigure 6-20. Dynamic DNS Hostname Enable Dynamic DNSPassword Dynamic DNS server6.5.3 Security Figure 6-23. Certificate Settings 6.5.4 CertificateCommon name 6.5.5 Serial Port Modem Init String Passthrough access to serial port via TelnetIPM 220-L Inline Power Module Serial line speedFigure 6-29. Event Log 6.5.6 Date And Time6.5.7 Event Log Figure 6-27. Date and TimeSNMP Logging enabled List logging enabledNFS Logging enabled SMTP Logging enabledHost Reset Board Reset performed by userFirmware updated by user Host PowerBoard Summary 6.6 Tools6.6.1 Device Status Figure 6-34. Update Firmware Reset Functions6.6.3 Update Firmware 6.6.2 Even logUpdating the firmware is a three-stage process 6.6.4 Unit Reset 7. Troubleshooting CE - Certificate 8. CertificatesA.1 VGA HD-15 A.2 RJ 45 Connector Ethernet A.3 RJ 45 Connector ISDN A. Pin AssignmentsB. Key Codes ENTER CAPS LOCK Key and aliases 0 - 9 A - Z TILDE MINUS =, EQUALS’ LESS SLASH BACK SPACE TABC. Video Modes D. Rack mount kit installation diagram