D-Link DSL-604+ Front Panel LED Display, Rear Panel Cable Connections, Power, Status, ADSL Link

Models: DSL-604+

1 67
Download 67 pages 22.61 Kb
Page 14
Image 14
Front Panel LED Display

DSL-604+ ADSL Ethernet Router User’s Guide

Front Panel LED Display

Place the Router in a location that permits an easy view of the LED indicators on the front panel.

The LED indicators on the front panel include the Power, Status, ADSL Link/Activity, and WLAN indicators. Each Ethernet LAN port displays a pair of indicators for monitoring connection speed (10M/100M), link status and activity (Link/Act).

 

Power

 

Steady green light indicates the unit is powered on.

 

 

 

 

 

Status

 

Lights steady green during power on self-test. Once the connection status has

 

 

been settled, the light will blink green.

 

 

 

 

 

 

 

 

ADSL: Link

 

Steady green light indicates a valid ADSL connection. This will light after the

 

 

ADSL negotiation process has been settled.

 

 

 

 

 

 

 

 

ADSL: Act

 

Blinking green light indicates activity on the WAN interface.

 

 

 

 

 

WLAN

 

Blinking green light indicates activity on the WLAN.

 

 

 

 

 

Ethernet: 10M

 

Steady green indicates a 100Mbps Fast Ethernet connection. For 10Mbps

 

100M

 

Ethernet connection it is dark.

 

 

 

 

 

Ethernet: Link

 

The rear panel of the Router provides access to the AC power adapter cord

 

Act

 

connection as well as the port connections.

 

 

 

 

Rear Panel Cable Connections

Connect the AC power adapter cord and network cables on the rear panel. The power switch and reset button are also located on the back of the device. Connect the antennas to the antenna posts.

 

Antenna

 

Factory

 

Ethernet LAN Ports: Connect

 

ADSL (WAN Port):

 

 

 

 

to Ethernet LAN;

 

Connect to ADSL line

 

 

post

 

 

reset

 

Four RJ-45 crossed ports

 

one RJ-11 port

 

 

 

 

button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power Adapter:

 

Antenna

Connect power here;

RJ-14 console port used for configuration;

 

one 7.5V DC 1.5A

post

 

power connection

requires RJ-14 to RS-232 adapter

 

 

 

 

 

 

 

 

 

4

 

 

Page 14
Image 14
D-Link Front Panel LED Display, Rear Panel Cable Connections, DSL-604+ ADSL Ethernet Router User’s Guide, Power, Status