In the Multiple PVC configuration menu configure the WAN interface settings described in the table below.
ALL CONNECTIONS MUST CONFIGURE:
| Select index to set | Choose the index number you wish to modify or delete. |
|
|
|
| Item Name | Type in a new name for this profile. |
|
|
|
| VPI | Type in the new VPI setting |
|
|
|
| VCI | Type in the new VCI setting |
|
|
|
|
| From the |
| Encapsulation | PPPoA VC mux, IPoA LLC, IPoA VC mux, Bridge LLC, or Bridge VC |
|
| mux. Default for Index 1 = PPPoA LLC. |
|
|
|
| PPP Connections must configure: | |
|
|
|
| Login User Name | Used for authentication by your network service provider. |
|
|
|
| Login Password | Used for authentication by your network service provider |
|
|
|
| Confirm Password | Type the same password to confirm it. |
|
|
|
| Authentication | Protocol used to confirm the identity of the subscriber. Choose chap |
| (default) or pap form the | |
|
| |
|
|
|
|
| Select enabled or disabled. When this function is enabled the router will |
|
| connect any workstation on your LAN to the Internet upon request. If this |
| Connect on Demand | function is disabled, it will be necessary to access this menu and hit the |
|
| Connect button each time you want to establish a connection to the |
|
| WAN or the Internet. |
|
|
|
|
| A value of 0 means that the PPP connection will remain connected. If |
|
| your network account is billed according to the amount of time the |
| Idle Time | Router is actually connected to the Internet, enter an appropriate Idle |
| Time value (in seconds). This will disconnect the Router after the WAN | |
|
| |
|
| connection has been idle for the amount of time specified. The default |
|
| value = 0. |
|
|
|
| IPoA Connections must configure: | |
|
|
|
|
| This is enabled by default and therefore no IP settings need to be |
| IP Unnumbered | entered for the account. If this is disabled, (global) IP settings must be |
|
| configured for the WAN interface. |
|
|
|
| IP Address | If IP Unnumbered is disabled, type in the WAN IP address for the |
| account. | |
|
| |
|
|
|
| Subnet Mask | If IP Unnumbered is disabled, type in the subnet mask for the WAN |
| interface. | |
|
| |
|
|
|
|
| WAN Connection Configuration |
Connect / Disconnect
If you have enabled the Connect on Demand feature, the Router will begin to negotiate the WAN connection upon restarting. If the Connect on Demand feature has been disabled, click the Connect button to initiate the connection via the ADSL WAN interface. The process will take a few seconds. To end the WAN connection, click on the Disconnect button.
21
