D-Link manual DSL-604+ ADSL Ethernet Router User’s Guide, the appropriate button to the right

DSL-604+ ADSL Ethernet Router User’s Guide

Port redirection is universally enabled or disabled for the Router with the Port Redirection State drop-down menu. The Existing Entry number tells you how many sets currently are configured. The Valid Entry number tells you the number of sets that are active.

	When adding a new set, choose the Not selected option from the drop-down
Index to Set	menu first. This will automatically add the next available index number to the
	new rule. If you are deleting or modifying an existing rule, select it and click
	the appropriate button to the right.
Item Name	Assign an appropriate name to the indexed redirection rule, ex. Internet,
	email, tftp, etc.
	Select Enabled to put the set into effect when it is applied. To save a set you
State	do not want to use now for later use without deleting it you can choose
	Disabled.
Protocol	Select the designated TCP or UDP protocol port number or use a well-know
	port for the particular protocol packet you wish to redirect.
Internet	Select one of the well-known ports to redirect incoming packets through that
	port.
Start Port	For a range of ports, this will be the first port in the range. For a single port
	enter the port number.
End Port	For a range of ports, this will be the last port in the range. For a single port
	just enter the same port number entered in Start Port.
Local Port	Enter the port number used by the designated host on the LAN or use a well-
	known port.
Local Computer	Enter the IP address of the local designated host computer or device.

If you wish to delete or modify an existing rule, select the index number and click the action button for Delete or Modify. Clicking on the Clear button will set the variables to the blank or default setting.

Each new set that is added will appear in the entry table at the top of the web page. When you have configure all the redirection sets you want to produce, click on the Apply button. You can save and reboot the system now, or continue to configure the Router.

35