Getting Started
1-4 Magellan
®
1000i
LED and Beeper Indicators

The scanner’s beeper sounds and its green LED illuminates to indicate various functions

or errors on the scanner. The tables below list these indications. One exception to the

behaviors listed in the tables is that the scanner’s functions are programmable, and may

or may not be turned on. For example, certain indications, such as the power-up beep

can be disabled using programming barcode labels.

Green LED Indications
LED
INDICATION INDICATION COMMENT
Power-on
indication Bright green flash Indicates the scanner has finished all its power up tests and is
now ready for ooperation.
Good Read
Indication Bright green flash Indicates a barcode has been read and decoded.
Scanner Ready Constant dim green The scanner is ready for operation.
Sleep Mode Constant green flash
(100mS on, 1900mS off)
The scanner is in Sleep Mode. To wake the scanner up, move
an object in front of its window or press the button atop the
unit.
Host Disable Constant green flash at 1 Hz
(100mS on, 900mS off)
The scanner is disabled due to receiving a disble command
from the POS terminal.
Diagnostics Vari es (s ee "Error Codes" on
page 1-5 for more information)
The LED can provide diagnostic feedback if the scanner dis-
covers a problem during SelfTest.
BEEPER FUNCTIONS
BEEPER
INDICATION INDICATION COMMENT
Power On Beep Single beep
The Power-On LED indication is a configurable feature which
can be enabled or disabled. When enabled, this beep Indi-
cates the scanner has finished all its power up tests and is
now ready for operation.
Good Read
Indication Single beep
The good read beep indication is configurable. Options
include: Enable/disable, frequency, duration and volume. See
the Product Reference Guide (PRG) for more information.
Diagnostics Vari es (s ee "Error Codes" on
page 1-5 for more information)
The Beeper can provide diagnostic feedback if the scanner
discovers a problem during SelfTest.
Programming
Mode
Indications
Varies (see the Product Reference
Guide for more information about
scanner programming)
The Beeper will sound as programming barcode labels are
scanned, indicating progress during scanner configuration.